Technical Assistance - Teledyne T200 User Manual

QUESTION
Do the critical flow orifices of my
analyzer require regular
replacement?
How do I set up and use the
contact closures (Control Inputs)
on the rear panel of the
analyzer?

TECHNICAL ASSISTANCE

If this manual and its troubleshooting & service section do not solve your problems,
technical assistance may be obtained from:
083730200A DCN7962
Use the data logger itself as the metering device during calibration
procedures.
No. The o-rings and the sintered filter associated with them require
replacement once a year, but the critical flow orifices do not.
See Section 5.6.9 for instructions.
See Section 2.3.1.6.
Teledyne API Technical Support
9970 Carroll Canyon Road
San Diego, California 92131-1106 USA
Toll-free Phone:
+1 800-324-5190
Phone:
+1 858-657-9800
Fax:
+1 858-657-9816
Email: api-techsupport@teledyne.com
Website:
http://www.teledyne-api.com/
Teledyne API T200 NO/NO
ANSWER
/NO Analyzer with NumaView™ Software
2 x
175