Apicom Remote Control Program; Figure 6-8: Apicom Remote Control Program Interface - Teledyne 200E Instruction Manual

Model 200E Instruction Manual
940331 is the default password. To change the default password, use the variable
RS232_PASS issued as follows:
Where N is any numeral between 0 and 9.

6.11.5. APICOM Remote Control Program

APICOM is an easy-to-use, yet powerful interface program that allows to access and control
any of T-API's main line of ambient and stack-gas instruments from a remote connection
through direct cable, modem or Ethernet. Section 6.10.3 and Figure 6-6 showed the remote
iDAS configuration through APICOM, Figure 6-8 shows the main interface, which resembles
and emulates the actual front panel functionality.

Figure 6-8: APICOM Remote Control Program Interface

Running APICOM, a user can:
• Establish a link from a remote location to the M200E through direct cable connection
via RS-232 modem or Ethernet.
• View the instrument's front panel and remotely access all functions that could be
accessed when standing in front of the instrument.
• View multiple instruments (including calibrators) from multiple sites at the same
time.
• Check on system parameters for trouble-shooting and quality control.
• Remotely edit system parameters and set points.
044100102 Rev A
LOGON 940331
V RS232_PASS=NNNNNN
Operating Instructions
107