Apicom Remote Control Program; Figure 6-10: Apicom Remote Control Program Interface - Teledyne 100E Instruction Manual

Operating Instructions

6.11.5. APICOM Remote Control Program

APICOM is an easy-to-use, yet powerful interface program that allows to access and
control any of T-API's main line of ambient and stack-gas instruments from a remote
connection through direct cable, modem or Ethernet. Running APICOM, a user can:
• Establish a link from a remote location to the M100E through direct cable
connection via RS-232 modem or Ethernet.
• View the instrument's front panel and remotely access all functions that could be
accessed when standing in front of the instrument.
• Remotely edit system parameters and set points.
• Download, view, graph and save data for predictive diagnostics or data analysis.
• Retrieve, view, edit, save and upload iDAS configurations.
• Check on system parameters for trouble-shooting and quality control.
APICOM is very helpful for initial setup, data analysis, maintenance and trouble-shooting.
Figure 6-8 shows an example of APICOM being used to remotely configuration the
instruments iDAS feature. Figure 6-10 shows examples of APICOM's main interface,
which emulates the look and functionality of the instruments actual front panel

Figure 6-10: APICOM Remote Control Program Interface

APICOM is included free of cost with the analyzer and the latest versions can also be
downloaded for free at http://www.teledyne-api.com/software/apicom/.
124
Model 100E Instruction Manual
045150102 Rev XB1