Password-Control { Aging | Composition | History | Length } Enable - HP HSR6600 Command Reference Manual

Syntax
password
undo password
Views
Local user view
Default command level
2: System level
Usage guidelines
Valid characters for a local user password are from the following four types:
Uppercase letters A to Z
•
Lowercase letters a to z
•
Digits 0 to 9
•
Blank space and 31 special characters: tilde (~),back quote (`), exclamation point (!), at sign (@),
•
pound sign (#), dollar sign ($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left
parenthesis ("("), right parenthesis (")"), underscore (_), plus sign (+), minus sign (-), equal sign (=),
left brace ({), right brace (}), vertical bar (|), left bracket ([), right bracket (]), back slash (\), colon
(:), quotation marks ("), semi-colon (;), apostrophe ('), left angle bracket (<), right angle bracket (>),
comma (,), dot (.), and slash (/)
A local user password configured in interactive mode must meet the password control requirement. For
example, if the minimum password length is set to 8, the password must contain at least eight characters.
Examples
# Set a password for local user test in interactive mode.
<Sysname> system-view
[Sysname] local-user test
[Sysname-luser-test] password
Password:**********
Confirm :**********
Updating user(s) information, please wait....
password-control { aging | composition | history | length }
enable
Use password-control { aging | composition | history | length } enable to enable the password aging,
composition restriction, history, or minimum password length restriction function.
Use undo password-control { aging | composition | history | length } enable to disable the specified
function.
Syntax

password-control { aging | composition | history | length } enable

undo password-control { aging | composition | history | length } enable
Default
The password control functions (aging, composition, history, and length) are all enabled.
216