Viewing Rip Statistics - Avaya P580 User Manual

Viewing RIP Statistics

Web Agent
Procedure
Document No. 650-100-700, Issue 1
You can view RIP statistics using either the Web Agent or the CLI.
To view RIP statistics using the Web Agent:
1. Select Interface Statistics from the Routing > IP > RIP group on the
Web Agent window. The RIP Interface Statistics dialog box opens
(Figure 14-6).
Figure 14-6. RIP Interface Statistics Dialog Box
2. To modify your RIP statistics:
Click CLEAR to reset all the entries.
—
Click REFRESH to receive the most up-to-date information on
—
the entries.
3. Use Table 14-4 to interpret the RIP statistics:
Table 14-4. RIP Statistical Parameters
Parameter
Interface
State
IP Address
Triggered Updates
Sent
Non-Triggered
Updates Sent
Updates Received
Defines the...
Interface associated with the IP address specified.
Current status of the RIP interface. UP indicates that
the interface is up and RIP can transmit and receive
updates.
IP address associated with the interface.
Number of RIP triggered updates sent.
Number of RIP non-triggered updates sent.
Number of RIP updates received based on route
changes in the IP routing table.
Configuring RIP Routing
1 of 2
14-11