Procedure
1. At the ACLI command prompt, enter the show ip ospf redistribute
2. Review the command output for policy information.
Configuring the redistribution policy
Before you begin
• Access the ACLI OSPF Router Configuration mode.
About this task
Use this procedure to redistribute external routes into an OSPF network.
Procedure
1. At the ACLI OSPF Router Configuration command prompt, enter the as-
2. At the command prompt, enter the redistribute rip/direct/static
3. At the command prompt, enter the ip ospf apply redistribute command
RIP packets are exchanged between devices but no routes
are learned
You must ensure that routes are learned between devices in the network.
Work flow: RIP packets are exchanged between devices but no
routes are learned
You can use the following work flow to help determine the solution for routes that are not being
learned between devices while RIP packets are being exchanged.
Troubleshooting
RIP packets are exchanged between devices but no routes are learned
command.
boundary-router enable command to command to make the router ASBR.
enable command to enable external route redistribution into the OSPF domain.
to apply the changes.
December 2013
179