Creating Ipx Static Routes - Avaya P580 User Manual

Multiservice switches

Hide thumbs Also See for P580:

Table of Contents

Creating IPX Static Routes

Document No. 650-100-700, Issue 1

Table 16-3. IPX Interface Dialog Box Parameters

Type 20 Packet

To begin the creation of a new IPX interface using the CLI, enter the

following command in Configure mode:

(configure)# interface <interface name>

You can create IPX static routes using either the Web Agent or the CLI.

To create IPX static routes using the Web Agent:

1. Select Static Routes from Routing > IPX > Configuration group on

the Web Agent window. The IPX Static Routes dialog box opens (see

Figure 16-6. IPX Static Routes Dialog Box

Allows you to...

Select Disable to prevent IPX RIP from routing globally.

This affects all IPX interfaces set up to use the IPX RIP

routing protocol. The default value is Enable.

Select Disable to prevent IPX SAP from routing

globally. This affects all IPX interfaces set up to use the

IPX SAP routing protocol. The default value is Enable.

Specify whether or not Type 20 packets can be sent,

received, disabled, or sent and received on a given

Options include:

Disable - Type 20 packets are neither sent nor received.

Inbound - Type 20 packets are received.

Outbound - Type 20 packets are sent.

Both - Type 20 packets are sent and received.

The default value is Disable

Configuring IPX Routing