Configuring Physical Ports On Gigabit Ports - Avaya P580 User Manual

Chapter 8

Configuring Physical Ports on Gigabit Ports

Web Agent
Procedure
8-18
You can configure the physical port parameters on Gigabit ports using
either the Web Agent or the CLI.
To configure ports on a gigabit module using the Web Agent:
1. Select Configuration from the Modules & Ports group on the Web
Agent window. The Module Information dialog box opens (Figure 8-2).
2. Select the port from the Ports column for the Gigabit module that you
want to configure. The Physical Port Configuration dialog box for that
module opens (Figure
Figure 8-5. Physical Port Configuration Dialog Box for the
Gigabit Ethernet Module
3. Click the checkbox in the Enable column to enable a port. A check mark
displays.
* Note: If the port is already enabled (check mark is visible), and you
want to disable the port, click the box to Disable the port
(check mark vanishes).
4. Click APPLY to save your settings, or CANCEL to restore previous
settings.
5. Select the port name from the Name field. The Detailed Physical Port
Configuration dialog box opens
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
8-5).
(Figure 8-6)