Avaya P580 User Manual page 442

Chapter 14
14-4
2. See Table 14-2 to modify the RIP interfaces dialog box parameters:
Table 14-2. RIP Interface Dialog Box Parameters
Parameter Allows you to...
Select Select the RIP interface to be modified.
Interface Displays an interface from a list of interfaces that you
previously configured.
Network Displays an IP address to be associated with the displayed
Address interface.
Mode Specify the RIP State. Different states include:
Talk/Listen is the default setting.
Send Version Specify the version of RIP you want to use to send packets
across this interface. Selections include:
V1 is the default setting
Receive Version Specify the version of RIP you want to use to receive
packets. Selections include:
V1 is the default setting
Split Horizon Specify that IP routes learned from an immediate neighbor
are not advertised back to the neighbor from which the
routes were learned.Selections include:
Default Metric Specify the RIP route metric value. Costing metric used
when advertising the RIP route on this interface.
1 is the default setting. The parameter range is 0-15.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
• talk only (only send RIP information on this interface)
• listen only (only receive RIP information on this
interface)
• talk/listen (both send and receive RIP information on
this interface)
• V1
• V2
• V1/V2
• V1
• V2
• V1/V2
• Split Horizon - Routes that leave this interface, will
not be advertised back on the same interface.
• Split Horizon with Poison Reverse - Routes that
leave this interface, will be advertised back on the
same interface with an infinite metric (16). Split
Horizon with Poison Reverse is the default setting.
1 of 2