Password Recovery - Avaya P580 User Manual

Appendix B

Password Recovery

Syntax
Description
B-2
Starting up threads ...
Periodic Task
Network Interface
Front Panel Display
Download
Command Line Parser
Boot process complete - system is now operational.
Boot Software Revision: V5.3
Press Ctrl-P for previous command, Ctrl-N for next command
download Download to FEPROM
feprom Flash EPROM configuration
initLogins Restore default passwords
ip IP Configuration
manuf Get/Set MAC address
nvram Initializes NV RAM-diags run upon reboot
peek Read from memory
ping Ping host [tries] [delay]
poke Write to memory
reset Reset System
Boot>
The following command is used to reset the switch to the factory default
passwords.
initLogins
Boot> initLogins set <0=no change, 1=factory default>
Using a value of zero will retain the current passwords in NVRAM upon
resetting the switch. Using a value of one will restore the factory default
passwords in NVRAM upon resetting the switch.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0