Chapter 16
Modifying IPX Static Routes
Web Agent
Procedure
CLI Command
Creating IPX Static Services
Web Agent
Procedure
16-12
You can modify IPX static routes form either the Web Agent or the CLI.
To modify an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX > Configuration group
on the Web Agent window. The IPX Static Routes dialog box opens
(see
Figure
16-7).
2. Select the checkbox for the IPX static route that you want to modify
from the Select column.
3. See
Table 16-4
to modify the IPX Static Route configuration.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
To modify an IPX static route using the CLI, enter the following command
Interface mode:
(config-if:<if-name>)# ipx route <network address
| range> <options>
You can create IPX static services using either the Web Agent or the CLI.
To create IPX static services using the Web Agent:
1. Select Static Services from the Routing > IPX > Configuration group
on the Web Agent window. The IPX Static Services dialog box opens
(see
Figure
16-9).
Figure 16-9. IPX static Services Dialog Box
2. Select CREATE to create a new static service. The Add IPX Static
Service dialog box opens (see
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Figure
16-10).