Displaying The Diffserv Table; Displaying The Qos Settings For A Physical Port - Avaya P580 User Manual

Displaying the DiffServ Table

Command

Displaying the QoS Settings for a Physical Port

Command
Document No. 650-100-700, Issue 1
Use the show diffserv table command to display the priority that is
assigned to each DSCP.
The syntax of the command is:
> show diffserv table
* Note: The show diffserv table CLI command displays the packet loss
probability (PLP) for each DSCP. However, the switch does
not currently support PLP.
Use the show port command to display the QoS settings for a physical port.
This command displays the priority of the port, if the port is set to ignore
802.1p tag priority, and if the port is set to use the DSCP for bridged IP
traffic.
The syntax of the command is:
> show port [{<mod-num> | <mod-swport-range>} [...,{<mod-num> |
<mod-swport-range>}]]
Table 25-13. Keywords, Arguments, and Options
Keyword, Argument or
Option
<mod-num>
<mod-swport-range>
Definition
The slot number of a module. If you specify
<mod-num>, the switch displays the QoS
settings for all ports on the module in the slot
that you specify.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
switch displays the QoS settings for the port
or range of ports on the module in the slot that
you specify.
80-Series QoS
25-21