Avaya P580 User Manual page 130

Chapter 4
Sample User File
4-22
Table 4-2. Avaya-Specific Attributes
Attribute Name
Avaya-Service-Type
Avaya-Management-
Type
Avaya-Group
The following is a sample user file. Each RADIUS vendor may have a
different method for configuring User files. In this sample, text values are
defined that represent the actual values used by the Avaya switch using the
directives ATTRIBUTE and VALUE.
Two user accounts are shown a Standard RADIUS account and an account
with VSAs. The first account is "Bob" with password "BooBoo". Bob is
only allowed to log in to the NAD at 199.87.201.2. Bob is also granted
Administrative privileges.
The second account is "Ann" with password "Pokey". The NAD she logs in
to must be configured to use group "AvayaSwitches". She is granted Read-
Only permission using the CLI (either Telnet or serial cable to the
supervisor's console port).
# define the Avaya Vendor Specific Attributes
ATTRIBUTE Avaya-Service-Type
ATTRIBUTE Avaya-Mgt-Type
ATTRIBUTE Avaya-Realm
ATTRIBUTE Avaya-Group
# Note: NAS-IP-Address is a Standard RADIUS Attribute
# define the Avaya-Service-Types
VALUE Avaya-Service-Type Avaya-Administrative 3
VALUE Avaya-Service-Type Avaya-Read-Write 2
VALUE Avaya-Service-Type Avaya-Read-Only 1
# define the Avaya Management Types
VALUE Avaya-Mgt-Type Avaya-Mgt-All 1
VALUE Avaya-Mgt-Type Avaya-Console-CLI 2
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Attribute Attribute Specific
Values Description
1 Avaya-Read-Only
Avaya-Read-Write
Avaya-
Administrative
2 Avaya-Mgt-All
Avaya-Local-CLI
Avaya-Remote-CLI
Avaya-Web
3 <group name>
Attribute
Specific
Value
1
2
3
1
2
3
4