Avaya P580 User Manual page 448

Chapter 14
CLI Commands
CLI Example
14-10
Table 14-3. Key Chain Parameters
Parameter
Key Accept
Time:seconds
Key Accept Year
Key Accept Month
Key Accept Day
Key Accept Duration
2. Click APPLY to save your changes, or CANCEL to restore previous
settings.
To assign or modify Key Chain parameters using the CLI, enter the
following commands from router:rip mode:
To create the Key Chain:
(configure router:rip)# key chain <Key Chain>
To set the Key Chain ID:
(configure router:rip)# key <Key ID>
To set the Key Name (MD5 Key):
(configure router:rip)# key-string <Key Name>
To set the Key Chain's start time and duration:
(configure router:rip)# accept-lifetime <hh:mm:ss>
<day> <month> <year> duration {<time> | infinite}
For Example: To create a Key Chain called AvayaChain with Key ID 123,
Key Name (MD5 Key) AvayaKey123 that begins on March 10, 2002 at
5:30 a.m. and lasts indefinitely, enter the commands in the following order:
key chain AvayaChain
key 123
key-string AvayaKey123
accept-lifetime 05:30:00 10 march 2002 duration infinite
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Defines the...
The second(0 - 59) this key becomes valid
The year (2000 - 2009) this key becomes valid
The month (1 - 12) this key becomes valid
The day (1 - 31) this key becomes valid. If you enter a
day that does not exist in a month such as the 31st of
February, the Key will not be created.
The duration in seconds that this key is valid. Enter -1
if the key is to last indefinitely.
2 of 2