Configuring Intelligent Multicasting; Configuring Global Intelligent Multicasting - Avaya P580 User Manual

Configuring Intelligent Multicasting

Configuring Global Intelligent Multicasting

Web Agent
Procedure
Document No. 650-100-700, Issue 1
Multiservice switch, only the client implementation of CGMP is available
in case the switch is connected to a Cisco router. This implementation is
called CGMP Snooping.
* Note: IGMP Snooping must be enabled to learn the sessions that the
LGMP server will disseminate. An LGMP server is active only
for VLANs that have an IGMP interface enabled.
This section provides the following procedures:
Configuring Global Intelligent Multicasting
Displaying Router Ports
Configuring Static Router Ports
Searching for Intelligent Multicast Sessions
Deleting an Intelligent Multicast Session
Deleting a Multicast Session Client Port
Creating a Static Multicast Session
Deleting Static Multicast Sessions
Creating Static Client Ports
Deleting Static Client Ports
You can configure intelligent multicasting globally using either the Web
Agent or the CLI.
To configure intelligent multicasting globally using the Web Agent:
1. Select Global Configuration from the Layer 2 Switching > Intelligent
Multicast group on the Web Agent window. The Intelligent Multicast
Global Configuration dialog box opens
* Note: You cannot delete Static sessions and client ports from this
dialog box. See
"Deleting Static Multicast
static sessions and client ports.
Managing Intelligent Multicasting
(Figure
"Deleting a Multicast Session Client
Sessions" in this chapter to delete
20-2).
Port" and
20-5