Creating An Appletalk Static Route - Avaya P580 User Manual

Chapter 19
CLI Commands

Creating an AppleTalk Static Route

Web Agent
Procedure
19-10
Use the following CLI commands in interface mode to delete an AppleTalk
interface:
(config-if:<interface-name>)# no appletalk cable-range <cable-
range>
(config-if:<interface-name>)# no appletalk address
<network.node>
(config-if:<interface-name>)# no appletalk zone <zone-name>
(config-if:<interface-name>)# no appletalk vlan <vlan-id>
You can create an AppleTalk static route using the Web Agent or the CLI.
To create an AppleTalk static route using the Web Agent:
1. Select Static Route from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk Static Route dialog
box opens (Figure 19-7).
Figure 19-7. AppleTalk Static Route Dialog Box
2. Select CREATE to add a new static route. The Add AppleTalk Static
Route dialog box opens
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
(Figure 19-8).