Document No. 650-100-700, Issue 1
Figure 15-6. Add OSPF Virtual Link Dialog Box
3. Enter the new OSPF Link information. See
of the Add OSPF Virtual Link dialog box parameters:
Table 15-4. Add OSPF Virtual Link Dialog Box Parameters
Parameter
Defines the...
Router ID
Router ID for the far end of the virtual link.
Area
Area ID through which the virtual link travels.
Transmit Delay
Estimated number of seconds it takes to transmit a link
state update packet over this virtual link. The value range
is 1-3600. The default is 1.
Retransmit
Number of seconds between link-state advertisement
Interval
retransmissions for adjacencies belonging to this virtual
link. This value is also used when retransmitting database
description and link-state request packets. The value
range is 1-3600. The default is 5.
Hello Interval
Time in seconds between the Hello packets that the router
sends on the virtual link. This value must be the same for
all routers attached to a common network. The value
range is 1-65535. The default is 10.
Configuring the OSPF Routing Protocol
Table 15-4
for an explanation
1 of 2
15-13