Changing Your Password - Avaya P580 User Manual

Chapter 2
CLI Commands

Changing Your Password

Web Agent
Procedure
2-22
When a user account expires, you reset the account by changing the
setting of this field from Disable to Enable.
9. Click APPLY.
To modify a user account, use the following CLI commands:
To modify a user account, (configure)# username <name>
password [encrypted-type1] <passwd> [access-type {read-only |
read-write | admin | <catName>}] [mgmt-type [all] [local-cli]
[remote-cli] [web]]
To modify the expiration period or expiration warning for a user
account, (configure)# username <name> [exp-period <exp-
period>] [exp-warning <exp-warning>]
To modify the status of a user account, (configure)#
username <name> status {enable | disable}
To view the settings for a user account, > show username
[<name>]
All users can change their own passwords.
To change your password:
1. In the navigation pane, expand the System folder.
2. Click Change Password. The Change Password Web page is displayed
in the content pane. See
Figure 2-12. Change Password Web Page
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Figure 2-12.