Chapter 21 - Monitoring The Avaya Multiservice Switch; Overview; Interpreting Front Panel Led Displays - Avaya P580 User Manual

21

Overview

Interpreting Front Panel LED Displays

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Monitoring the Avaya
Multiservice Switch
The following information and procedures provided in this chapter pertain
to layer 2 and layer 3 module configurations:
Interpreting Front Panel LED Displays
Checking Active Alarms
Using the Event Subsystem
Configuring Syslog Event Reporting
Configuring Utilization Monitoring
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.0.
For an explanation of the switch front-panel LEDs, see
Table 21-1. Front Panel LED Explanations
Module... LED...
All Modules Module
Status
Gigabit TX/RX
Modules
Behavior... Indication...
Solid green Normal operation.
Flashing orange Diagnostic failure.
Off Module not operational or not
receiving power.
Flashing orange Port sending/receiving traffic.
Off Port not sending/receiving
traffic.
Table 21-1.
1 of 2
21-1