CLI Commands
Viewing AppleTalk Statistics
Viewing AppleTalk Global Statistics
Web Agent
Procedure
Document No. 650-100-700, Issue 1
To add interfaces to a zone filter using the CLI, enter the following
command from Interface mode:
(config-if:<interface-name>)# appletalk access-
list <access-list-number> <permit | deny> zone
<string>
To delete interfaces to an zone filter, enter the following command from
Interface mode:
(config-if:<interface-name>)# no appletalk access-
list <access-list-number> <permit | deny> zone
<string>
This section includes:
Viewing AppleTalk Global Statistics
Viewing the AppleTalk Interface Statistics Table
CLI Command
Viewing AppleTalk Route Table Statistics
Viewing the AppleTalk ARP Cache Table
Viewing the AppleTalk Zone Table
Viewing AppleTalk Zone Table Statistics
Viewing the AppleTalk NBP Table
You can view AppleTalk global statistics using either the Web Agent or the
CLI.
To view AppleTalk global statistics using the Web Agent:
1. Select Global Statistics from the Routing > AppleTalk > Display
group on the Web Agent window. The AppleTalk Global Statistics
dialog box opens
(Figure
Configuring AppleTalk Routing
19-20).
19-23