Chapter 17
Viewing RIP Interface Statistics
Web Agent
Procedure
CLI Command
17-8
You can view RIP Interface Statistics from either the Web Agent or the CLI.
To view RIP Interface Statistics using the Web Agent:
1. Select Interface Statistics from the Routing > IPX > RIP Interface
Statistics group in the Web Agent window. The RIP Interface
Statistics dialog box opens.
2. See
Table 17-3
for an explanation of the IPX RIP interface Statistics.
3. Click on CLEAR to remove the statistics, or REFRESH to access
current interfaces statistics.
Table 17-3. IPX RIP Interface Statistical Parameters
Parameter
Interface
State
Network Number
Triggered Updates Sent
Non-triggered Updates
Sent
Updates Received
Requests Received
Bad Packets Received
To interpret IPX RIP interface statistics using the CLI, enter the following
command from Interface mode:
(config-if <interface name>)# show ipx interface
[<intf-name>]
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Definition
The IPX interface associated with this RIP interface.
The current state of the RIP interface.
The network number of the IPX network associated
with the interface.
The number of triggered updates sent from the RIP
interface.
The number of non-triggered updates sent from the
RIP interface.
The number of updates received. Updates may be
received periodically even if no changes have
occurred.
The number of requests received on the RIP
interface.
The number of bad packets received on the RIP
interface.