Displaying Dvmrp Neighbor Routers - Avaya P580 User Manual

Chapter 12
CLI Command

Displaying DVMRP Neighbor Routers

Web Agent
Procedure
12-64
Table 12-20. DVMRP Interface Statistics Parameters
Parameter
Invalid Routes
Received
Neighbor DVMRP
Router(s)
To display the DVMRP interface statistics using the CLI, enter the
following command from configuration mode:
(configure)# show ip dvmrp interface
To view the DVMRP neighbor routers using the Web Agent:
1. Select Interface Statistics from the Routing > DVMRP group on the
Web Agent window. The DVMRP Interface Statistics dialog box
opens (Figure 12-30).
Figure 12-31. DVMRP Neighbor Routes Dialog Box
2. Select the number in the Neighbor DVMRP Router(s) column, if it is 1
or more. The DVMRP neighbor routers dialog box opens.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Defines the...
Number of invalid routes received on this interface.
Number of (neighbor) routers that are also running
DVMRP.
Note:
This number is a hypertext link that provides
additional information on the DVMRP
neighbor router(s).
2 of 2