Configuring The Forwarding Cache - Avaya P580 User Manual

Chapter 22

Configuring the Forwarding Cache

Web Agent
Procedure
22-2
This issue is most prevalent when the 10-Gigabit module as well as the rest
switch is processing a high volume of layer 3 traffic flows.
To prevent this issue from occurring, monitor the forwarding cache and
increase the maximum number of system entries as necessary. You may
need to adjust the setting initially to accommodate peaks in network
demand.
You can configure the forwarding cache using the Web Agent or the CLI.
To configure the forwarding cache using the Web Agent:
1. Select Cache Configuration from the Routing >
L3 Forwarding Cache group on the Web Agent window. The Layer 3
Forwarding Cache Configuration dialog box opens
Figure 22-1. Layer-3 Forwarding Cache Configuration Web
Page
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
(Figure 22-1).