Viewing Configured Views; Deleting A View; Configuring Groups; Creating Or Modifying A Group - Avaya P580 User Manual

Viewing Configured Views

Deleting a View

Configuring Groups

Creating or Modifying a Group

Document No. 650-100-700, Issue 1
Table 5-5 provides an explanation of the command keywords and variables.
Table 5-5. snmp-server view Command
Parameter
<viewname>
<OIDST>
{included | excluded}
To view the currently configured views, use the following CLI command:
# show snmp view [<viewname>]
To delete a view or remove an OID from a view, use the following CLI
command:
(configure)# no snmp-server view <viewname> [<OIDST>]
To create or modify a group, use the following CLI command:
(configure)# snmp-server group <groupname> {noAuth | auth |
priv} [read <readview>] [write <writeview>] [notify <notifyview>]
Table 5-6 provides an explanation of the command keywords and variables.
Definition
The name of the view that you want to create or
modify. The view name can range from 1 to 32
alphanumeric characters.
The object identifier (OID) for the object that you want
to either include or exclude from the view.
You must enter the numeric OID. Use the wildcard
character * to specify a sub-tree family.
Specifies whether the object is included or excluded
from the view.
Configuring SNMP
5-13