Modifying A User Account - Avaya P580 User Manual

Chapter 2
CLI Command

Modifying a User Account

2-20
8. In the Expiration Warning (weeks) field, enter the number of weeks
before user account expiration that you want the user warned. The
expiration warning can range from 0 to the expiration period. A setting
of 0 indicates that no warning is generated.
9. In the Access Type field, select an access type for the user. The options
are:
READ_ONLY
—
READ_WRITE
—
ADMINISTRATOR
—
Custom access types—All custom access types that are
—
configured on the switch are displayed. For information on
custom access types, see
earlier in this chapter.
10. In the Management Type field, select the interfaces from which the
user can manage the switch. The options are:
Local CLI. User can manage the switch from the serial console
—
on the supervisor module.
Remote CLI. User can manage the switch by means of a Telnet
—
or SSH session.
Web. User can manage the switch by means of the Web Agent.
—
11. Click APPLY.
To create a user account, use the following CLI commands:
To create a user account, (configure)# username <name>
password [encrypted-type1] <passwd> [access-type {read-only |
read-write | admin | <catName>}] [mgmt-type [all] [local-cli]
[remote-cli] [web]]
To set an expiration period and expiration warning,
(configure)# username <name> [exp-period <exp-period>]
[exp-warning <exp-warning>]
To modify a user account:
1. In the navigation pane, expand the System > Administration folders.
2. Click User Accounts. The User Account Management Web page is
displayed in the content pane. See
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
"Configuring Custom Access
Figure 2-9.
Types"