CLI Command
Displaying the IGMP Local Multicast Forwarding Cache
Document No. 650-100-700, Issue 1
Table 12-17. IGMP Group Membership Table Dialog Box Fields
Parameter
Group Reporter Address
Entry Expiration Period
in (sec)
To display the multicast group table using the CLI, enter the following
command from configuration mode:
(configure)# show ip igmp groups
To display the multicast forwarding cache information (IGMP only
interfaces):
1. Select Local Multicast Forwarding Cache from the Routing > IGMP
group on the Web Agent window. The Local Multicast Forwarding
Cache dialog box opens.
Figure 12-28. Local Multicast Forwarding Cache Dialog Box
2. To modify the Local Multicast Forwarding Cache, select an entry and:
Click Delete Entry to delete one or more entries.
—
Click Flush Table to clear the entire table.
—
Click REFRESH to receive the most up-to-date information on
—
the entries in the table.
Defines the...
IP address of the host that sent the most recent host
membership report for this group.
Expiration time (in seconds) of the group that is
being displayed.
Configuring IP Routing
2 of 2
12-59