Avaya P580 User Manual page 232

Chapter 8
8-20
10. Select Enable from the Full Duplex Flow Control Advertisement
field pull down menu
11. Select Enable from the Pace Priority Mode field pull down menu to
recognize and use 3Com's PACE priority mechanism.
12. Select Enable from the Remote Fault detect field pull down menu to
detect
13. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 8-4 provides a more detailed description of the Detailed Physical
Port dialog box parameters.
Table 8-4. Detailed Physical Port Dialog Box Parameters
Parameter Definition
Name A user-definable name for this port (possibly a drop
connection name or the name of the station or other device
connected to the port).
Category The User Port option is intended for use with switch
connections to end user nodes. It is intended for use with
switch connections to servers or other switches.
The Service Port allows the switch to generate both log
messages and alarm messages (traps). The User Port only
generates log messages. This prevents your network
management station from being overwhelmed by port up/
down messages that result from users turning workstations
on and off.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
1 of 2