Viewing Rip Statistics - Avaya 580 User Manual

Viewing RIP Statistics

Web Agent
Procedure
Document No. 10-300077, Issue 2
You can view RIP statistics using either the Web Agent or the CLI.
To view RIP statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IP > RIP folders, and then
click Interface Statistics.
The RIP Interface Statistics Web page is displayed in the content pane.
See Figure 14-6.
Figure 14-6. RIP Interface Statistics Web Page
2. To modify your RIP statistics:
Click CLEAR to reset all the entries.
—
Click REFRESH to receive the most up-to-date information on
—
the entries.
3. Use Table 14-4 to interpret the RIP statistics:
Table 14-4. RIP Statistical Parameters
Parameter
Interface
State
IP Address
Triggered Updates
Sent
Non-Triggered
Updates Sent
Defines the...
Interface associated with the IP address specified.
Current status of the RIP interface. UP indicates that
the interface is up and RIP can transmit and receive
updates.
IP address associated with the interface.
Number of RIP triggered updates sent.
Number of RIP non-triggered updates sent.
Configuring RIP Routing
1 of 2
14-11