Avaya P580 User Manual page 525

Document No. 650-100-700, Issue 1
Table 18-3. Add IPX SAP Network Filter Dialog Box Parameters
Parameter Allows you to...
Type Specify the service type (in hex) that identifies the type of
service the server provides. Well-known service types
include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services (278)
A value of ffff matches all service type values.
Direction Select the direction of the filter in question. Filter choices
include:
• Inbound - Applies the filter only to SAP packets
• Outbound - Applies the filter only to SAP packets sent
• Both - Applies the filter to SAP packets both sent and
Default value is outbound.
Filter/ Disable whether the services matching Net and Type are
Suppress filtered (inbound) or suppressed (outbound).
• Filtered - Applies the filter only to SAP packets
• Suppressed - Applies the filter only to SAP packets
Select Disable to disable the filtering and suppression of
traffic. The default is Enable.
Hops Specify the number of routers (hops) that the packet must pass
through before reaching the service(s) matched by the filter.
This entry is used to override the value in the SAP packet.
Entering 0 ensures that there is no override in the transmission
of data on the network.
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Configuring the IPX SAP Protocol
received on the interface.
on the interface.
received on the interface
received (inbound direction) on the interface.
sent (outbound direction) on the interface.
2 of 2
18-9