Chapter 19
CLI Command
Deleting an AppleTalk Static Route
Web Agent
Procedure
CLI Command
19-14
9. Enter the type to be associated with the static route in the Type field.
10. Click APPLY to save the new zone.
To edit an AppleTalk static route using the CLI, enter the following
command from Interface mode:
(config-if:<interface-name>)# appletalk static
cable-range <options>
You can delete an AppleTalk static route using either the Web Agent or the
CLI.
To delete an AppleTalk static route using the Web Agent:
1. Select Static Route from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk Interfaces dialog box
opens
(Figure
19-12).
Figure 19-12. AppleTalk Static Route
2. Select the AppleTalk static route that you want to delete from the Select
column.
3. Click DELETE to remove the AppleTalk static route.
To delete an AppleTalk static route using the CLI, enter the following
command in Configure mode:
(config-if:<interface-name>)# no appletalk static
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0