Avaya P580 User Manual page 342

Chapter 12
CLI Command
12-26
Figure 12-10. IP BOOTP/DHCP Server Dialog Box
2. Select CREATE. The Add BOOTP/DHCP Server Entry dialog box
opens (Figure 12-11).
Figure 12-11. Add BOOTP/DHCP Server Entry Dialog Box
3. Enter the BOOTP/DHCP server IP address in the IP Address field.
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
* Note: It is possible to create multiple BOOTP/DHCP Server Entries if
necessary.
To create a BOOTP/DHCP entry using the CLI, enter the following
command in Configure mode:
(configure)# ip boot-dhcp server <ip-address>
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0