Avaya P580 User Manual page 720

Appendix A
CLI Command
A-6
Figure A-3. System TFTP Update Web page
3. In the TFTP Server IP Address field, enter the IP address of the TFTP
server on which the new application software is stored.
4. In the File Name field, enter the name of the binary file that you want to
download.
5. In the TFTP Target Section field, select the memory location to which
you want to download the new application software.
6. In the Perform Update Now field, select Update.
7. In the Get Status of Most Recent Update field, select Status to verify
that the new image downloaded properly.
The status of the update is displayed in the TFTP Update Status pane.
To download new application software from a TFTP server to an APP
memory location by using the CLI, use the following command:
(configure)# copy tftp flash {app1 | app2} {cardapp1 | cardapp2}
<image_opt_path> <ip-addr>
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0