Displaying Ospf Neighbors - Avaya P580 User Manual

CLI Commands

Displaying OSPF Neighbors

Web Agent
Procedure
Document No. 650-100-700, Issue 1
Figure 15-10. OSPF Links Dialog Box
2. See Table 15-7 for an explanation of the OSPF Links dialog box
parameters:
Table 15-7. OSPF Link Parameters
Parameter Displays the...
State State of the OSPF link.
IP Address IP address of the OSPF link.
Area ID Area ID (IP address) associated with the OSPF link.
Type Type of OSPF link.
DR Router ID Router ID of the designated router.
DR Address IP address of the designated router.
BDR Address IP address of the designated border router.
To display OSPF links using the CLI, enter the following command:
> show ip ospf interface
> show ip ospf virtual-links
The OSPF neighbors table summarizes the list of OSPF interfaces and their
associated neighbors. You can display OSPF neighbors using either the Web
Agent or the CLI.
To display the OSPF neighbors using the Web Agent:
1. Select Neighbors from the Routing > IP > OSPF group on the Web
Agent window. The OSPF Neighbors dialog box opens
Configuring the OSPF Routing Protocol
(Figure 15-11).
15-21