Troubleshooting IPv6
3. Observe the command output display for inconsistencies with the IPv6 default gateway
configuration.
Viewing switch IPv6 default gateway interface statistics
Use this procedure to display and observe statistics for the communication between the switch IPv6
interface and the IPv6 default gateway.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show ipv6 interface statistics command to display the switch IPv6
interface statistics.
3. Observe the command output display for communication inconsistencies.
Viewing switch IPv6 interface ICMP statistics
Use this procedure to display and observe Internet Control Message Protocol (ICMP) statistics for
the communication between the switch IPv6 interface and the IPv6 default gateway.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the show ipv6 interface icmpstatistics command to display the switch IPv6
interface ICMP statistics.
3. Observe the command output display.
Unable to connect to the switch with IPv6 Telnet, HTTP, or
SSH
This section describes the troubleshooting process you can use to correct IPv6 connectivity for
Telnet, Web, or SSH protocols.
Confirming the switch IPv6 address
Use this procedure to verify that the correct IPv6 address was used to attempt the Telnet, HTTP, or
SSH connection to the switch.
Troubleshooting Avaya VSP 7000 Series
56
Comments on this document? infodev@avaya.com
July 2015