Viewing RIP Statistics
Viewing RIP
Statistics Using
the Web Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1
You can view RIP statistics using either the Web Agent or the CLI.
To view RIP statistics using the Web Agent:
1. Select Interface Statistics from the Routing> IP > RIP
group on the Web Agent window. The RIP Interface
Statistics dialog box opens (Figure 10-6).
Figure 10-6. RIP Interface Statistics Dialog Box
2. To modify your RIP statistics:
Click CLEAR to reset all the entries.
—
Click REFRESH to receive the most up-to-date
—
information on the entries.
3. Use Table 10-4 to interpret the RIP statistics:
Table 10-4. RIP Statistical Parameters
Parameter
Interface
State
IP Address
Triggered Updates
Sent
Non-Triggered
Updates Sent
Updates Received
Defines the...
Interface associated with the IP address specified.
Current status of the RIP interface. UP indicates that
the interface is up and RIP can transmit and receive
updates.
IP address associated with the interface.
Number of RIP triggered updates sent.
Number of RIP non-triggered updates sent.
Number of RIP updates received based on route
changes in the IP routing table.
Configuring RIP Routing
1 of 2
10-11