Avaya P580 User Manual page 546

Chapter 19
CLI Command
19-16
Figure 19-14. Add AppleTalk NBP Filter Dialog Box
3. See Table 19-3 to configure the Add AppleTalk NBP filter dialog box.
Table 19-3. AppleTalk NBP Filter Parameters
Parameter Definition
Access List Enter the access list number to be associated with the NBP
filter. Valid values are 600-631.
Name Enter the name of the NBP name object to be filtered.
Type Select the type of filtering. The options include:
Interface Select the interface(s) to apply this filter to.
4. Click CREATE to add your new static route, or CANCEL to restore
previous settings.
To create an NBP filter using the CLI, enter the following command from
Interface mode:
(config-if:<interface-name>)# appletalk access-
list <access-list-number> <permit | deny> nbp
<string>
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
• Deny
• Permit