Displaying The Policing Settings - Avaya P580 User Manual

Displaying the Policing Settings

Document No. 650-100-700, Issue 1
Use the show port police command to display the settings for policing. For
information on how policing works, see
chapter.
The syntax for this command is:
> show port police {<mod-num> | <mod-swport-range>} [..., {<mod-
num> | <mod-swport-range>}]
Table 25-19. Keywords, Arguments, and Options
Keyword, Argument or
Option
<mod-num>
<mod-swport-range>
"Ingress Policing" earlier in this
Definition
The slot number of a module. If you specify
<mod-num>, the switch displays the policing
settings for all ports on the module in the slot
that you specify.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
switch displays the policing settings for the
port or range of ports on the module in the slot
that you specify.
80-Series QoS
25-33