Chapter 14
CLI Command
NBMA IP Interfaces
Overview
CAUTION:
14-12
Table 14-4. RIP Statistical Parameters
Parameter
Bad Packets
Received
Bad Routes Received
To view RIP statistics using the CLI, enter the following command from
Configure mode:
(configure)# show ip rip statistics
Non-broadcast multi-access (NBMA) functionality was added to RIP and
OSPF routing protocols on the Avaya Multiservice switch software. Support
for this functionality was added to enable route exchange over nonbridged
connections (routed PVCs).For more information about NBMA, see
"NBMA IP
Interfaces" in
Protocol".
The NBMA feature is not backward compatible. If you have NBMA
interfaces set up and need to downgrade from v6.0 to a 5.2 version
of software, contact technical support.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Defines the...
Number of bad packets received on this interface.
Number of bad routes received on this interface.
Chapter
15,
"Configuring the OSPF Routing
2 of 2