Using The Event Subsystem; Overview - Avaya P580 User Manual

Multiservice switches

Hide thumbs Also See for P580:

Table of Contents

Using the Event Subsystem

Document No. 650-100-700, Issue 1

Figure 21-1. Active Alarm Table Dialog Box

Use the show alarms CLI command to view the active alarm table. You can

enter this command in User mode.

The Avaya P580 and P882 Multiservice switches have two activity logs:

Event Log - stores a large table of events. You can set the size of

the table. Because these events are stored in switch memory, the list

is cleared each time the switch reboots.

Shutdown Log - stores the same information as the event Log, but

generally in a smaller table because the table is stored in the

switch's nonvolatile RAM (NVRAM). This log list is particularly

useful in assessing the cause of a switch failure because the

information is retained even after the switch restarts.

This sections contains procedures for the following tasks:

Configuring Event Notification

Configuring Notification of Protocol Events

Setting Log Size

Monitoring the Avaya Multiservice Switch