Chapter 20
Managing IGMP Snooping
Enabling IGMP Snooping
Web Agent
Procedure
20-20
This section provides the following procedures for managing Internet Group
Management Protocol (IGMP) snooping:
Enabling IGMP Snooping
Viewing IGMP Snooping Statistics
You can enable IGMP snooping using either the Web Agent or the CLI.
To enable IGMP Snooping using the Web Agent:
1. Select IGMP Snooping from the L2 > Intelligent Multicast group on
the Web Agent window. The IGMP Snooping dialog box opens
(Figure
20-11).
Figure 20-11. IGMP Snooping Dialog Box
* Note: IGMP snooping only works on VLANS that have an IGMP
interface enabled. You must also enable intelligent
multicasting on a global basis.
2. Select Enable from the State field.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0