Avaya P580 User Manual page 416

Chapter 13
13-6
* Note: The IP Access List displays all standard and extended
access rules that have been created. If no rules have
been created, the following statement displays: No
IP Access Rules are currently
configured.
Due to its size,
dialog box split in two separate sections.
The switch supports a maximum total of 512 access
control rules, regardless of the number of access lists.
For example, you could create the following three
ACLs:
• ACL A with 100 rules
• ACL B with 200 rules
• ACL C with 212 rules
The combined total of rules cannot exceed 512. Only one
access control list can be enabled at a time.
Index numbers of access rules can range from 1 to 512. Do
not use index numbers higher than 512.
Figure 13-1. IP Access List Dialog Box
2. Click Create Standard. The Create Standard Access List dialog box
opens (Figure 13-2).
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Figure 13-1 shows the Access List