Avaya P580 User Manual page 438

Chapter 13
Web Agent
Procedure
CLI Command
13-28
Between 15,000 and 30,000, the switch changes the setting to
30,000.
Greater than 30,000, the switch does not change the setting.
* Important: Changing the Maximum Cache Entries parameter
affects every L3-enabled F-chip on the P580/P882.
To use the Web Agent to manually double the IP Unicast maximum to
30,000 entries:
1. In the navigation pane, expand the Routing > L3 Forwarding Cache,
and then click Cache Configuration. The Layer-3 Forwarding Cache
Configuration Web page is displayed in the content pane.
2. In the Maximum Entries field for IP Unicast traffic, enter 30000.
3. Click APPLY.
To use the CLI to manually double the IP Unicast maximum to 30,000
entries, enter the following CLI command:
(configure)# ip unicast route-cache max-size 30000
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0