CLI Command
Document No. 650-100-700, Issue 1
2. See
Table 20-13
for an explanation of the CGMP Snooping dialog box
parameters.
Table 20-13. CGMP Snooping Dialog Box Parameters
Parameter
Definition
Enable State
Select to enable or disable CGMP snooping.
CGMP Packet
• Join Messages Received - Displays the number of
Reception
Statistics
• Leave Messages Received - Displays the number of
• Unknown Messages Received - Displays the number of
Intelligent
• New Sessions Created - Displays the number of new
Multicast
Session
• New Client Ports Added - Displays the number of new
Statistics
• Existing Sessions Removed - Displays the number of
• All Sessions Removed - Displays the number of times
• New Router Ports Added - Displays the number of
• Existing Router Ports Removed - Displays the number
3. Click...
APPLY to save your changes
—
CANCEL to restore previous settings.
—
To enable CGMP snooping using the CLI, enter the following command
from Configure mode:
(configure)# set cgmp enable
Managing Intelligent Multicasting
CGMP join messages received.
CGMP leave messages received.
unknown CGMP messages received.
multicast sessions created by CGMP snooping.
client ports added to a multicast session.
existing multicast sessions that have been removed by
CGMP snooping.
that all multicast sessions created by CGMP snooping
were removed.
new router ports added by CGMP snooping.
of router ports that were created by the CGMP snooper
and were removed.
20-35