CLI Command
Viewing the AppleTalk Zone Table
Web Agent
Procedure
Document No. 650-100-700, Issue 1
Table 19-9. AppleTalk ARP Cache Table Parameters
Parameter
Type
TTL
3. Select the checkbox next to any specific ARP entries that you want to
delete and click Delete Entries.
or
Click Flush Route Table to reset the ARP cache table entries. Only
Dynamic and Router Neighbor entries are flushed.
To view the AppleTalk ARP cache table using the CLI, enter the following
command from User mode:
> show appletalk arp [all]
You can view the AppleTalk Zone table using either the Web Agent or the
CLI.
To view the AppleTalk zone table using the Web Agent:
1. Select Zone Table from the Routing > AppleTalk > Display group on
the Web Agent window. The AppleTalk Zone Table opens
25).
Definition
Displays the type of cache entries.The values are:
• Local
• Broadcast
• Dynamic
• Router Neighbor
Displays the time-to-live value for the selected
AppleTalk ARP cache table entry. Local and Broadcast
entries do not time out.
Configuring AppleTalk Routing
2 of 2
(Figure 19-
19-31