Viewing The Lgmp Server Statistics - Avaya P580 User Manual

CLI Command

Viewing the LGMP Server Statistics

Web Agent
Procedure
Document No. 650-100-700, Issue 1
Table 20-9. LGMP Server Configuration Dialog Box Parameters
Parameter Definition
LGMP Message
Transmission
Statistics
Intelligent
Multicast Session
Statistics
To configure the LGMP server using the CLI, enter the following command
from Configure mode:
(configure)# set lgmp server <options>
You can view the LGMP server statistics using either the Web Agent or the
CLI.
To enable/view the LGMP server using the Web Agent:
1. Select LGMP Snooping from the L2 > Intelligent Multicast group on
the Web Agent window. The LGMP Server Configuration dialog box
opens (Figure 20-12).
2. Select Enable from the State field, if it is not already displayed.
3. Click CLEAR to clear the statistics or REFRESH to refresh the
contents of the table.
Managing Intelligent Multicasting
• Report - Displays the number of LGMP report
messages transmitted.
• Leave - Displays the number of LGMP leave
messages transmitted.
• End Session - Displays the number of LGMP end
session messages transmitted.
• Router Report - Displays the number of LGMP
router report messages transmitted.
• Router Leave - Displays the number of LGMP
router leave messages transmitted.
• Client Ports Added- Displays the number of add
client events generated by LGMP.
• Client Ports Removed - Displays the number of
remove client events generated by LGMP.
• Sessions Removed- Displays the number of remove
session events generated by LGMP.
• Router Ports Added- Displays the number of add
router events generated by LGMP.
• Router Ports Removed- Displays the number of
remove router events generated by LGMP.
2 of 2
20-25