Deleting A User; Changing A User Password - Avaya P580 User Manual

Deleting a User

Changing a User Password

Document No. 650-100-700, Issue 1
This command displays the following information:
User name
Group to which the user belongs
Authentication protocol that is used for the authentication and
encryption passwords: MD5, SHA, or None if authentication is not
enabled.
Localized authentication key of the user if authentication is enabled.
For information on localized keys, see
Encryption."
State of encryption, Yes if enabled, or No if disabled.
Localized encryption key of the user if encryption is enabled. For
information on localized keys, see
To delete an SNMPv3 user, use the following CLI command:
(configure)# no snmp-server user <username>
You must change user passwords when the engine ID changes.
To change a user password, use the following CLI command:
(configure)# snmp-server password <username>
The switch prompts you to enter the new password or passwords. The
passwords are case-sensitive and can range from 8 to 64 characters. For
security reasons, the CLI does not display the passwords when you enter
them.
Configuring SNMP
"Authentication and
"Authentication and Encryption."
5-17