Adding Or Deleting Interfaces To An Nbp Filter - Avaya P580 User Manual

Chapter 19

Adding or Deleting Interfaces to an NBP Filter

Web Agent
Procedure
CLI Commands
19-18
You can add or delete interfaces to an NBP filter using either the Web
Agent or the CLI.
To add or delete interfaces to an NBP filter using the Web Agent:
1. Select NBP Filter from the Routing > AppleTalk > Configuration
group on the Web Agent window. The AppleTalk NBP Filter dialog
box opens (see Figure
2. Select Edit If. The Add/Delete Interface to NBP Filter dialog box
opens (see Figure 19-16).
Figure 19-16. Add/Delete Interface to NBP Filter Dialog Box
3. Select the interface to be added from the Add field pull-down menu.
Or
Click an interface from the Select column for the interface that you
want to be remove.
4. Click:
Add to add this NBP filter to the selected interface.
—
DELETE to remove this NBP filter from the selected interface.
—
CANCEL to restore previous settings.
—
To add interfaces to an NBP filter using the CLI, use the following
command:
(configure)# appletalk access-list <access-list-
number> <permit | deny> nbp <string>
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
19-15).