Avaya P580 User Manual page 81

Document No. 650-100-700, Issue 1
4. Enter a connection name for the computer you are dialing in the Type a
name for the computer you are dialing field.
5. Open the Select a Modem pull-down menu.
6. Select your modem and select Configure. The Modem Properties
window opens.
7. Select the Connection tab. The Connection window opens.
8. Select the following from the Connection Preferences window:
Open the Data bits pull-down menu and select 8.
—
Open the Parity pull-down menu and select None.
—
Open the Stop bits pull-down menu and select 1.
—
9. Select Advanced. The Advanced Connection Settings window opens.
10. Select Software (XON/XOFF) from the Use flow control field.
11. Select OK to close the window. The Modem Properties window re-
opens.
12. Select the Options tab. The Options window opens.
13. Select Bring up terminal window after dialing from the Connection
Control field. Select OK. The Modem Properties window closes and
the wizard continues.
14. Select Next from the wizard window and enter the telephone number
you are calling.
15. Select Next. The wizard reports that you have successfully configured a
modem.
16. Select Finish. The wizard closes and the newly configured connection
displays in your Dial-Up networking program group.
17. Select your new connection right click the mouse.
18. Select Properties. The Properties window opens.
19. Select the Server Types tab and de-select all advanced options except
TCP/IP.
20. Select TCP/IP Settings. The TCP/IP Settings window opens.
21. Select Specify an IP Address and enter the IP address fro the serial port
interface.
22. Select Server assigned name server addresses.
Setting Up the Switch
2-31