Setting The Administrative Contact - Avaya P580 User Manual

ATM Module
Community String

Setting the Administrative Contact

CLI Command
SNMP
Document No. 650-100-700, Issue 1
To delete a community string for the ATM-Uplink module, use the
following command:
(configure)# no snmp-server atm-community <community-string>
[<ip-addr>]
provides an explanation of the command variables.
Table 5-12
Table 5-12. no snmp-server community Command
Parameter
<community-string>
[<ip-addr>]
To set the administrative contact for the switch, use the following CLI
command:
(configure)# snmp-server contact <contact-name>
The switch displays the administrative contact when you enter the show
snmp command. For information on this command, see
SNMP Status."
Table 5-13 provides an explanation of the command variable.
Table 5-13. snmp contact Command
Parameter
<contact-name>
To set the administrative contact for the switch, use the sysContact object,
OID 1.3.6.1.2.1.1.4.
The complete path to this object is:
iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).
sysContact(4)
Definition
The community string that you want to delete.
The IP address from which you want to remove
access to the community string.
Definition
The name of the administrative contact for the switch.
The contact name can range from 1 to 127 characters.
Configuring SNMP
"Viewing the
5-21