Avaya P580 User Manual page 169

Document No. 650-100-700, Issue 1
Table 6-2. VLAN Switch Port Dialog Box Parameters
Parameter Defines...
Binding Type The binding types are set through the switch ports. See
"Assigning VLANs to a Port and Associated
Chapter
See
"Configuring
Frame Format
Note:
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Using VLANs, Hunt Groups, and VTP Snooping
8, "Configuring Ports."
• Static - when switch ports are added manually and
can be removed
• Persistent - when switch ports are bound to VLANs
automatically but can not be removed. automatically
(i.e., if the binding for a switch port is set to 'Bind to
All').
• Dynamic - when a switch port is assigned to VLAN
using automatic VLAN binding,(i.e. if the binding for
a switch port is set to "Bind to Received"). The
VLAN may be deleted, but if the port VLAN binding
is "Bind to Received", the VLAN may be re-added
by receiving tagged traffic. This causes the port to
again dynamically bind to the VLAN.
"Configuring Switch Ports
Ports," for more information.
• From Port - causes port to send frames using the
frame format specified in the Trunk Mode attribute of
the corresponding switch port.
• Clear - causes port to send untagged frames on this
port for this VLAN.
See "VLAN Introduction" earlier in this chapter.
Issues" in
Settings" in Chapter 8,
2 of 2
6-11